Face frame cabinets are just plywood boxes with hardwood face frames, and you can buy doors (the hard part) online. Pocket hole screws are a fast and easy way to join a face frame. Cabinetmakers discuss various techniques for joining cabinet face frames. October 31, 2000. I’m having great difficulty connecting my cabinets together. After numerous attempts, there are gaps in between the face frames and the front faces of the cabinets don’t line up.
With the cabinets on the floor, align the face frame of the upper corner cabinet so it’s flush with the frame of the neighboring cabinet. One challenge woodworkers face as they learn how to build cabinets is gluing the cabinet face frame to the case. A cabinet face frame is the wood fixed to the front of a cabinet case sometimes called a carcase, which hides the edges of the case and provides the fixing point for doors and other external hardware. What is your preferred method of joining face frames? We use pocket holes at work, but I have worked on a remodel were the cabinets face frames were half lap probably 30-40 yr old cabinets.
For example, on a base cabinet, pocket holes should be placed on the rails and then connected to the outside stiles. You can use a variety of joinery options to make cabinet face frames, including dowels, mortise-and-tenons or biscuits, but none are as fast as pocket screws. When building face frame cabinets, joining the portions of the face frame together is arguably probably the most challenging task in the entire process.
Join The Upper Cabinets
When it comes to assembling face-frames for cabinets, there’s nothing faster than pocket-hole joints — each joint takes about 90 seconds apiece using a store-bought jig. Apply glue as I would normally and join it with pocket screws. Kitchen cabinets I’m building – face frame construction. Hi dennis, in an older issue of fww (can’t remember) there was an article on buscuit joining cabinet face frames on to their carcasses, if not that idea what about dowels? I haven’t got the clearest image of what your trying to do but it seems that if face nailing is an option,albeit the last one, then either of the other ideas might work too, It’s the clamping them on the boxes side of the equation I can’t get my mind around. Types of wood for the face frames, the wood used to make the carcass and the engineered boards used for the flat sides of a kitchen cabinet?. As far as the carcass for the cabinets, I recommend baltic birch plywood. Give your cabinet doors a professional look with MLCS V-Groove face frame joining router bit.