For face frame cabinets, a set of Cabinet Claw Clamps is hands-down the best helper. These specially designed clamps hook around the back of the face frame and apply pressure both to the sides of the frames to hold them together, and to the front to bring the surfaces flush. With the cabinets on the floor, align the face frame of the upper corner cabinet so it’s flush with the frame of the neighboring cabinet. Clamp them together. Continue setting all the base cabinets to complete the base cabinet installation. Check each cabinet for levelness before securing the face frames together and attaching the cabinet to the wall.
Face frame cabinets are just plywood boxes with hardwood face frames, and you can buy doors (the hard part) online. Label all the pieces with a pencil so the frame goes back together the same way you laid it out. Pocket hole screws are a fast and easy way to join a face frame. Pocket screws let you assemble perfect, indestructible cabinet joints without expensive woodworking tools or complicated jigs—a huge leap forward for beginning woodworkers. Corrosion- resistant exterior screws, washer head screws for joining particleboard, and hi-lo thread screws for softwood are also available. No fancy cutting is required; joints are simply butted together, saving time and reducing tool costs. Clamp the jig to the end of a face frame board and bore holes for two pocket screws. There are several methods I use to ATTACH the face frame but I generally always BUILD the face. When I’m building kitchen or bath single cabinets, I put a face frame on each one separately and then attach the cabinets together.
We bought some very inexpensive but beautiful face-frame kitchen cabinets at a store that sells recycled building materials, but nobody we’ve talked to agrees on the size and type of screw for attaching them to each other or to the wall. On face-frame cabinets, it’s easiest to drill two 1/8-inch pilot holes through the sides of the face frame and screw the cabinets together. Continue to add adjoining cabinets in this manner, joining them as you did the wall cabinets. You can use a variety of joinery options to make cabinet face frames, including dowels, mortise-and-tenons or biscuits, but none are as fast as pocket screws. An easy way to find the exact length of the top and bottom rails is to set the stiles together and so they’re lined up with the outside face of the cabinet side.
Face Frame Cabinet Building Tips
The first step to installing wall cabinets is to join units within a run together. The joining procedures for face-frame style cabinets and frameless cabinets differ slightly. What is your preferred method of joining face frames? The last cabinet I built I used haf laps to join the frame components and through dowels to connect the face frame to the cabinet. I use pocket screws because they are very quick, easy, and when glued together they are quite strong. Wall cabinets are screwed together to form a group, a hole is drilled for undercabinet lighting, the cabinets are lifted into position, leveled, and screwed to the studs Related Articles:. The wall cabinets were initially joined only at the face frames, but that left the rear ends able to flop around.