Plywood Board And Batten Sample Plans PDF

I have to replace the board and batten siding on a 40 year old lake house. Customer wants same material (plywood board with pine 1 x3 battens). If you prefer not to work with plywood, other cost-friendly materials include MDF and composite. DIY board and batten exterior – cost, pictures, and step by step guide. I used thicker plywood sheathing that I could fasten the siding to without having to install framing blocks.

plywood board and batten 2I have put up board and batten siding using rough sawn lumber – but not plywood – never heard of doing that except with maybe T-111. Otherwise, they disintegrate fast! Saw this in action just last weekend – a cabin sheathed in non T1-111 rated plywood, and not kept painted, was quickly on its way to becoming a run-down and leaky shack. I have built some cabins with the board and batten look. I however wanted the wind bracing of a plywood, so I just used the lumber for the batten. Colors, board and batten, brown deck, white trim, metal roof.

Board-and-batten can be installed onto solid plywood or OSB sheathing. If your sheathing is not solid, you will need to first attach horizontal furring strips. I know there are plywoods that are intended for this purpose, with an attractive face and often cut grooves to make it look like board-and-batten or other traditional vertical sidings. Board and batten siding is the underdog of siding systems, but we like it for the following reasons: It has the potential to be visually clean and crisp It has a timeless look and weathers nicely if implemented correctly The system takes the natural expansion and contraction of materials into consideration It’s been around for a long time, carpenters and siders are familiar with it It’s durable. Steve -plywood isn’t typically rated for exterior use (it won’t last long).

Plywood Siding On House. Anyone Done It Or Know How?

It’s simulated batten-on-board siding made using exterior-grade plywood and furring strips. Board and batten siding was quick and easy to install in two configurations; batten-on-board where wide boards were nailed over girts and then narrow boards were nailed over the gap between the wider boards – or board-on-batten where narrow boards were first nailed to the girts and then wider boards were installed over the narrow boards leaving a gap about an inch to two inches wide between the edges of the wide boards. True Board and Batten is done directly on the stud frame with no sheathing underneath. Here’s what the plywood board and batten looks like: Still needs another coat of solid stain. Open to anything, but would particularly like large sheets. The inexpensive plywood is patterned (sort of board and batten looking but not really. Plytanium has a great plywood siding, however, it has grooves. I want a smooth siding for a board and batten effect, with the battens being 1X2s every 16 inches going vertically. Are you wondering what the heck Board and Batten is? Put the plywood sheets up on the wall, checked that all was level, and fired off the nail gun. With ply and batten I can throw up big 4’x8′ sheets of plywood and a few 1×3’s and get instant gratification. And for the prices and effort to do this instead of lap siding, I feel it’s a fair trade off for the looks I’ll be getting.

Installing Board-and-batten Siding

Two styles of board and batten: This house designed by Kaplan Thompson Architects combines conventional and reverse board-and-batten vertical siding. Wood, fiber-cement or plywood siding should not be installed directly over the foam, writes senior editor Martin Holladay.