We’ll show you how to clean and renew your deck like a pro in two four-hour periods. Our deck is pressure-treated pine, so the brightening of the wood is less noticeable. They all will damage the deck wood. The most common way to deep clean and brighten a dirty gray pressure treated wood, cedar, redwood, hardwood or composite deck is to use a cleaner/brightener that has an oxalic acid base. Use Wood Deck Cleaner & Brightener before oiling with Ipe Oil or any UV protection. These concentrated powders are formulated specially to cleanse and brighten exterior wood decks, wood fences, patios, terraces, wood siding, benches, chairs, and other outdoor wood items.
The pre-staining stage of the project is a crucial one. It prepares your canvas for what will doubtless be wood-deck work of art once you’re done. The typical process looks like this:. How to clean wood decks, remove stains, and refinish. Now on to the procedure for proper deck restoration which includes two steps, first cleaning and then stain removal and brightening. To get the gray out of a wood deck, be careful about pressure washing. It dramatically cleans and brightens wood without leaving a whitewashed look, and is harmless to the surrounding plant life and adjacent vinyl or wood siding around a deck.
101 Wood Deck Staining Cleaning Restoration Tips! Do I need to brighten the deck after doing this or do you think that this cleaner effectively removed most of the mill glazing? The cleaner just went into the power washer and then was mixed in with the spray. It cleans, brightens, and removes mold and mildew stains. It will brighten gray, weathered wood to create a refreshed appearance and can be used as a cleaner for cedar and redwood. After the wood deck has been cleaned following the Restore A Deck Cleaner instructions allow the wood to dry for 1-2 days before applying a wood deck stain or sealer. Cleaning in sections is fine but brighten all the wood at the same time when done.
Clean, Strip And Brighten Your Deck Before Staining
Woodrich Brand wood deck, wood fence, garden deck, wood siding cleaning and staining sealing products. Going through the cleaning and brightening steps will also remove things you might not see like mold and mildew spores or oily hand prints from handling the wood during construction. We found this Behr Wood Stain & Finish Stripper and decided to give it a go. After everything is stripped you’re supposed to follow-up with a cleaner to brighten the stripped wood and, more importantly (to me at least) to neutralize the stripping chemical. Brightens and restores exterior wood surfaces without scrubbing. Sikkens Cetol BL Deck & Wood Cleaner is a fast acting gel that takes just 15 minutes to revitalise and brighten grey and weathered timber. Ideal for large areas such as decking. As certified wood restoration experts, we know how to treat your wood decks and fence with the proper care. On re-coats or bare wood finishes, only cleaning and brightening is necessary. A pressure washer can clean a wood deck much faster than you can do it scrubbing by hand.
101 Wood Deck Cleaning Staining Tips
Messmer’s Wood and Deck Cleaner and Brightener (Part A and B) powder concentrates are specially formulated to clean and brighten exterior wood decks, fences, log homes, and other exterior wood projects. Did you stain your deck and find poor results shortly after? Cleaning and brightening the wood has a lot more value than simply making the wood look nice. Before you stain the deck, you should have a professional power wash and clean the deck to remove any remaining stain, sealant, dirt and grime. As always, be sure to seal the deck after cleaning or brightening the wood to ensure that it continues to look refreshed until the next treatment. Benjamin Moore offers four prep products for decks and siding which include Remove, Restore, Brighten, and Clean. These products can be used to properly prepare the wood surfaces for the staining job.
Tips for professional wood deck cleaning including types of chemicals and how to use them.